Survey Markers

Marker
Marker

Feno,Permanent survey markers,Miscellaneous topographical accessories,Concrete Survey Markers,Survey Monuments,Survey Nails & Survey Washers, Smart Targets, Datums & Reflectors, Specialty Markers South-GeoSystems,Survey Stakes,Survey Monuments, Survey Caps, Spike, Polyroc Blocks, FENO Accessories, Installation Tools, Survey Nails, Plastic Hub Disc, Plastic Survey Stakes

The permanent survey markers,Miscellaneous topographical accessories

Option

Standard Polyroc head with anchorage

The standard marker consists of a polyroc head with three anchor lengths: 350, 500 and 600 mm. The polyroc head is available in three colours and is manufactured from resin-concrete, a material which is very similar to granite.
SOUTHGEOSYSTEMS
x-047-350-047

Standard polyroc head with a fluted spike and centring point

The standard polyroc head with a fluted spike and centring point
16351-047
kg
Add to cart

The installation tools

The installation tools,The Driving tool For 350, 500 et 600 mm anchorages (reusable)
130-047
kg
Add to cart
Option

Nails

Hardened striated nail with “calibel” washer, Use: marking on hard surface. Fixed with a hammer.Material: High Strength, electro-zinc plated steel. Diameter: 4 mm,L : 25 mm Head, diameter : 10 mm with centring point. “Calibel washer”, diameter: 25 mm
SOUTHGEOSYSTEMS
4025-047
Option

washers

washers for nail,Use: marking on hard surface. Fixed with a hammer.Material: High Strength, electro-zinc plated steel. Diameter: 4 mm,L : 25 mm Head, diameter : 10 mm with centring point.“Calibel washer”, diameter: 25 mmNails and washers are packed separately in bags of 100.
SOUTHGEOSYSTEMS
25501-047
Option

Standard Surveying nail with washer

Use: marking on pavements or bitumen-based surfaces. Fixed using a hammer. Material: high strength, electro-zinc plated steel. Diameter: 7.5 mm Lengths: 45, 60 and 100 mm. Head Diameter: 16 mm with centring point. Washer diameter: 30 mm. Packed in bags of 50.

7545-047
Option

Steel reference marks

Use: marking on macadamised shoulders.Material: High strength, electro-zinc plated steel.Diameter: 14 mm, L: 150 and 200 mm. Head diameter: 22 mm with centring point. Packed in bags of 10
SOUTHGEOSYSTEMS
14150-047

Fluted spike with domed head

(with centre point)For use in very hard ground, either as a stand-alone marker or with a marker head. 200 mm long with 15 mm shaft and 30 mm head.In bags of 50 pieces.

16200-047
kg
Add to cart

Washer for tempered steel nail

Washer for tempered steel nail,Fluted spike with domed head,Feno,Permanent survey markers,Miscellaneous topographical accessories,Concrete Survey Markers,Survey Monuments,Survey Nails & Survey Washers, Smart Targets, Datums & Reflectors, Specialty Markers South-GeoSystems,Survey Stakes,Survey Monuments, Survey Caps, Spike, Polyroc Blocks, FENO Accessories, Installation Tools, Survey Nails, Plastic Hub Disc, Plastic Survey Stakes
SOUTHGEOSYSTEMS
5003-47

Identity disk

Made in either black laquered or natural aluminium. Enables the surveyor to inscribe any desired information, such as text, logos etc. in permanent engraving. Secured by the survey nail, with or without a washer . 68 mm dia.
SOUTHGEOSYSTEMS
43-017

Brass marks

Use: marking on walls, facades, etc.Material: brass. Delivered with plastic plug. Drilled with a front hole of diameter 12 mm. Head diameter: 30 mm with centring point. L: 45 mm. Packed in bags of 10.

3043-047
kg
Add to cart
Option

Tempered steel surveying nail

Use: marking on hard surfaces. (certified design)

9061-47